Cleaning bathtubs are indeed challenging when you have back pains. One will know how it hurts once they have felt the numbness and pain it brings when they clean bathtubs the conventional way.
In doing so, most activities that require cleaning will eventually lead to a point where you will use your back to reach the farthest areas in order to get the cleaning done perfectly.
Fortunately, there are some tricks to get things done without having to experience the pain when doing a sparkly cleaning session for your bathtub. These tricks that we will mention in this guide will not require you to bend so that you can keep your posture the way it is.
Practice these three best ways to avoid backaches in the future. Understand carefully and grasp the importance of why we should clean the bathtub without bending.
Why should we clean the bathtub without bending?
Bathtubs are one of the places that are the most often used parts of the home. Unfortunately, these areas may easily accumulate dirt, filth, germs, and soap scums. There
fore they must be cleaned on a regular basis or generally after taking a bath or using the bathtub. In addition, they are known for creating back strains since it may be tough to scrub and get to the corners without bending over them.
The thing is, we need to maintain posture when doing cleaning like this because it will revert to long-term pain once not being prevented.
Sometimes we often wonder, in most cases, that whenever we clean bathtubs, we usually bend our back to reach the corners. However, it is not the proper way to do it, and most of us don’t argue that we are usually doing it unknowingly.
General steps in cleaning bathtub with a non-slip surface
1. Be familiar with your bathtub
Not all bathtubs are similar, and various kinds of bathtubs may need different cleaning methods in order to be cleaned properly. When planning to clean your bathtub, pay specific attention to the surface of your bathtub. But most bathtubs today are non-slip surfaces, some of which are built of stoner, porcelain, and fiberglass. If you do not have an anti-slip bathtub, you can use a bath mat in it.
With that said, cleaning bathtubs will need particular skills and equipment before you begin.
2. Get the best-suited cleaner
Once you know what sort of surface your bathtub has, you may choose the appropriate cleaning equipment and materials for it. Ideally, when purchasing a cleaner, always read labels to see if the cleaner is abrasive.
Be careful with these because they may damage the entire surface of your bathtub. Homemade cleaners can also be done so that they won’t cause damage to your bathtub.
You can either use a paste prepared from baking soda or mix it with water. This will be an excellent DIY tub cleaning that works particularly with dirt and soap scums. Another thing is to utilise warm water and vinegar since it is known to be the mother of all spot-cleaning.
3. Clear the area
When you have all the materials ready, you are now down to the hard part, the cleaning session. Before that, you need to clear all things around by removing other bath products, including shampoos, soaps, and body washes, from the corners of the bathtub.
Set them aside so that you can clean the whole bathtub in one go. Trying to work when these things around become an obstacle that may complicate the cleaning procedures.
4. Inspect the whole bathtub
After removing everything, inspect your bathtub and check for any signs of stains and dirt. Large stains indicate a lot of filth and grime. These are the places where you should concentrate your efforts first.
5. Apply the cleaners
Once you have chosen the area where you will start the cleaning process, get a hold of your cleaners and apply them to the said area. Start from that outside the tub and work your way out towards the centre.
Apply the cleaners in tiny circular movements to get hold of the first dust and grimes. IN this part, most people experience the discomfort that bending can bring.
6. Use proper equipment
To ease the pain that bending can bring, you can get some proper equipment to assist you in improving the uncomfortable position require when applying cleaners to the bathtub. You can use the suggested equipment that you will get from reading this guide which can be found in the next sections.
7. Pay special attention to stained areas
Start scrubbing from the areas that need to be cleaned thoroughly while washing your equipment. By doing it adequately, you will remove the stains in these places and eventually will aid in the removal of stains, thus restoring the cleanliness of your bathtub.
8. Relax for a while
Don’t overexert yourself, and have some rest. You can grab some snacks while waiting for the cleaners to do their work. It will save you some time, and more likely, it will produce better results than rushing things out.
9. Rinse well
When rinsing a bathtub, either use the showerhead or grab a bucket full of water. This part is often overlooked since some individuals leave their cleaners for longer hours, causing damage to the bathtub’s surface.
In doing so, you need to keep in mind to rinse it at a particular time so that it will lengthen the structure of your bathtub. Moreover, if your bathtub has shower doors, it’s a good idea to rinse them off.
Even though it’s difficult to notice, it’s probably that the residue of the cleaners with the dirt has gotten onto them.
10. wipe, wipe and wipe
After securing, rinse every bathtub surface and wipe it off with a towel or a clean cloth. This is to make the bathtub back to its original glossy and spot-clean appearance.
Do make use of your foot when doing the wiping so that you won’t hurt your back from bending.
With that, your bathtub will sparkle and shine and provide you with the sensation of clean fulfillment you want at the end of the cleaning procedure.
How to clean a bathtub without bending: Using a broom
It might sound crazy at first, but a broom can really help you clean a bathtub. And this is an easier way of doing things than using your back.
Below are the steps on how to clean a bathtub without bending using a broom:
1. Gather materials
The first thing you will need is to gather all the resources to clean the bathtub. Buy a cheap broom, and remember to use it solely on your bathtub and not just use it as an overall cleaner.
Get a dish soap and follow it up with white vinegar or baking soda. And don’t forget an empty bottle for the solution.
2. Prepare the solution
This is tricky because sometimes, it needs trial and error to get the best proportion. But at first, you can do a 50/50 solution mix of vinegar and dish soap. Then, pour the solution into the empty bottle and shake it.
3. Spray the solution on the bathtub
The next thing that you will do is spray the solution on the whole surface of your bathtub. Give your bathtub an adequate amount of solution that it needs in order to get the spot-clean finish that you are expecting.
4. Broom-it!
Once you have poured the solution, get your broom and start cleaning the entirety of the bathtub. Swish it all over the sides and around the center. By using a broom, you are preventing yourself from bending and thus avoiding back pains.
5. Scruby-dub-dub
Now that you have swished all of the solutions, let the solution sit for a while, get some snacks and return a couple of few minutes. After that, it’s now the time to do some scrubbing. First, scrub all the parts that you may see a major cleaning to do. Remember not to miss any spots.
6. Rinse it well
After scrubbing all the parts, it’s now the time to give your bathtub a rinse. Use the showerhead to rinse every part of the bathtub. Include the broom as well so that you may use it again the next time.
7. Aftercare
This is the part that most people ignore. Doing some aftercare will get things done.
Return the things you have set aside and once you are done, turn on the exhaust fan to let your bathroom dry. This will help in preventing smell outbreaks from your bathroom.
How to clean a bathtub without bending: Using a sponge with an extended handle
Consider purchasing a sponge with an extended handle to assist you in avoiding overextending your back. Long-handle bath sponges are widely used by many since they may assist in extending the reach so that you won’t have to bend to a certain extreme degree.
Below are the steps on how to clean a bathtub without bending using a sponge with an extended handle:
1. Before starting cleaning the bathtub, get all the materials first and the sponge with an extended handle. Check to see if it is still in shape and if the products you are using are not empty. Don’t forget to get baking soda and vinegar because these are the lifeline of every cleaning spree session.
2. Spring an adequate amount of baking soda or vinegar all over the tub and let it soak for at least 10 to 15 minutes. Ensure that you have thoroughly sprayed every surface of your bathtub. Don’t forget to spray some on the outside portion too.
3. Allow the homemade treatment liquids to handle most of the whole task because it will surely break down soap residues and thick dirt.
4. After waiting and whenever ready to start, grab a bucket full of water and toss the sponge with an extended handle onto it to make it wet. Start scrubbing the tub with the equipment and get things done from the top to the bottom center.
5. Allow the cleaning solution to sit for a few minutes after scrubbing to let it break down any stubborn dirt you have missed. However, you need to take into account not leave the cleaning solution for a long time because it may cause damage to the surface of the bathtub.
6. After waiting for a few minutes, do a final scrubbing and rinse everything with water. Repeat as needed when you see some areas that have not been cleaned outright.
How to clean a bathtub without bending: Using a cotton ring mop
This is another version of how to clean a bathtub without bending, and this time we are using a cotton ring mop. Again, this equipment can be bought for cheap in local nearby stores.
Below are the steps on how to clean a bathtub without bending using a cotton ring mop:
1. Before cleaning the bathtub, gather the materials you will need. Have some soap dish, a bucket full of water, baking soda or vinegar and the cotton ring mop.
2. Have your bathtub some hot water first by pouring a bucket full of hot water all over the tub. This will get rid of some stubborn stains and make it easier for you to get the stains and dirt remains.
3. Get a cupful of baking soda and sprinkle it around the surface of the entire bathtub. Ensure that you have sprayed everything and don’t miss any spots so that you won’t redo it again.
4. Make a homemade dish soap solution plus vinegar and a half-gallon of warm water. This cleaning solution is best for cleaning non-slip surfaces, and it will assist you in getting a sparkling finish for your bathtub.
5. Dip the cotton ring mop onto the bucket with the solution. Start scrubbing from the corners towards the center of the bathtub.
6. Periodically rinse the cotton ring mop using the solution to transfer the mixture to the bathtub. In this way, the solution won’t get wasted.
7. After doing some frequent rinsing and observing that there is still stubborn dirt, get baking soda and have it directly onto that stained surface. You can also pour in some vinegar to get the dirt off that bathtub section. Then, scrub it again thoroughly and ensure that the stains are removed.
8. Once you have removed the stain and stubborn dirt, use the showerhead to rinse the bathtub. Finish it up afterwards using a clean piece of towel or dry cloth. Make sure to wipe everything and don’t leave any residue. If you have an exhaust fan in your bathroom, turn it on so that it will remove any moisture from your bathtub.
How often should you clean a bathtub?
When cleaning a bathtub, you should consider setting a schedule for a major cleaning session, but more or less, you need to take short wipes after bathing. This may help remove soap scum and lengthen the duration of your next major cleaning.
When deciding on a full major cleaning bathtub session, set it monthly, or if you are addicted to cleaning, you can do it on a weekly schedule. We suggest that you do this on the weekends.
How to get rid of yellow stains in the bathtub?
In removing yellow stains in the bathtub, a pint of vinegar will do the trick here. This is the most widely hack to remove these types of stains. Often so, vinegar is used on different bathtubs’ surface and are proven to remove even stubborn stains.
Final Words
When cleaning bathtubs, it is essential to take regular rests once in a while if you have a bad posture and a poor back. Allowing yourself to relax in between cleaning duties will allow your body to recoup while allowing you to grip away from those back pains and aches.
Whenever you feel that you can’t bear it any longer, decide to stop immediately and get some rest. Try to stretch it out so that you will become relieved from the pain.
With that said, you should find a way to prevent this and decrease the number of times you have to bend, whether by investing in the material mentioned in this guide or cleaning less forcefully.
Using handy tools may assist you in cleaning every area of your bathtub. Also, get the most appropriate equipment that can really help you avoid suffering.
Finally, don’t keep everything by yourself, you can get some help from other members of the family or perhaps your friends. Remember that your health is more vital than a beautiful home
